L-051-4 1/10 Truck Body Shell Roof Mount Light Super Bright 4 Square LEDs White

Description

L-051-4 1/10 Truck Body Shell Roof Mount Light Super Bright 4 Square LEDs White
This product data sheet is originally written in English.
1/10 Alloy Superbright Light Bar - 4 Leds
To suit 1/10 scale models car or truck shells. The body shell these are to go will require drilling for these to be put in place. Screws and fixings included.
Measures: 72mm long.
Two methods to power:
a) 3rd channel on receiver or using the receiver battery port if your using an esc.
b) Seperate 6v battery pack (no other voltage will work. Must be 6v ni-mh / ni-cd).
Voltage input = 6v. If your receiver is running a higher voltage output for the servos/esc this will not work.
Simple on off toggle switch
(no modes just on or off only).
Male JR connector installed.
Part Number: L-051-4
Made by: BSP
1/10 Alloy Superbright Light Bar - 4 Leds   To suit 1/10 scale models car or truck shells. The body shell these are to go will require drilling for these to be put in place. Screws and fixings included.   Measures: 72mm long.   Two methods to power: a) 3rd channel on receiver or using the receiver battery port if your using an esc. b) Seperate 6v battery pack (no other voltage will work. Must be 6v ni-mh / ni-cd).   Voltage input = 6v. If your receiver is running a higher voltage output for the servos/esc this will not work.   Simple on off toggle switch (no modes just on or off only).   Male JR connector installed.   Part Number: L-051-4 Made by: BSP
1/10 Alloy Superbright Light Bar - 4 Leds   To suit 1/10 scale models car or truck shells. The body shell these are to go will require drilling for these to be put in place. Screws and fixings included.   Measures: 72mm long.   Two methods to power: a) 3rd channel on receiver or using the receiver battery port if your using an esc. b) Seperate 6v battery pack (no other voltage will work. Must be 6v ni-mh / ni-cd).   Voltage input = 6v. If your receiver is running a higher voltage output for the servos/esc this will not work.   Simple on off toggle switch (no modes just on or off only).   Male JR connector installed.   Part Number: L-051-4 Made by: BSP
1/10 Alloy Superbright Light Bar - 4 Leds   To suit 1/10 scale models car or truck shells. The body shell these are to go will require drilling for these to be put in place. Screws and fixings included.   Measures: 72mm long.   Two methods to power: a) 3rd channel on receiver or using the receiver battery port if your using an esc. b) Seperate 6v battery pack (no other voltage will work. Must be 6v ni-mh / ni-cd).   Voltage input = 6v. If your receiver is running a higher voltage output for the servos/esc this will not work.   Simple on off toggle switch (no modes just on or off only).   Male JR connector installed.   Part Number: L-051-4 Made by: BSP
1/10 Alloy Superbright Light Bar - 4 Leds   To suit 1/10 scale models car or truck shells. The body shell these are to go will require drilling for these to be put in place. Screws and fixings included.   Measures: 72mm long.   Two methods to power: a) 3rd channel on receiver or using the receiver battery port if your using an esc. b) Seperate 6v battery pack (no other voltage will work. Must be 6v ni-mh / ni-cd).   Voltage input = 6v. If your receiver is running a higher voltage output for the servos/esc this will not work.   Simple on off toggle switch (no modes just on or off only).   Male JR connector installed.   Part Number: L-051-4 Made by: BSP
1/10 Alloy Superbright Light Bar - 4 Leds   To suit 1/10 scale models car or truck shells. The body shell these are to go will require drilling for these to be put in place. Screws and fixings included.   Measures: 72mm long.   Two methods to power: a) 3rd channel on receiver or using the receiver battery port if your using an esc. b) Seperate 6v battery pack (no other voltage will work. Must be 6v ni-mh / ni-cd).   Voltage input = 6v. If your receiver is running a higher voltage output for the servos/esc this will not work.   Simple on off toggle switch (no modes just on or off only).   Male JR connector installed.   Part Number: L-051-4 Made by: BSP
1/10 Alloy Superbright Light Bar - 4 Leds   To suit 1/10 scale models car or truck shells. The body shell these are to go will require drilling for these to be put in place. Screws and fixings included.   Measures: 72mm long.   Two methods to power: a) 3rd channel on receiver or using the receiver battery port if your using an esc. b) Seperate 6v battery pack (no other voltage will work. Must be 6v ni-mh / ni-cd).   Voltage input = 6v. If your receiver is running a higher voltage output for the servos/esc this will not work.   Simple on off toggle switch (no modes just on or off only).   Male JR connector installed.   Part Number: L-051-4 Made by: BSP
1/10 Alloy Superbright Light Bar - 4 Leds   To suit 1/10 scale models car or truck shells. The body shell these are to go will require drilling for these to be put in place. Screws and fixings included.   Measures: 72mm long.   Two methods to power: a) 3rd channel on receiver or using the receiver battery port if your using an esc. b) Seperate 6v battery pack (no other voltage will work. Must be 6v ni-mh / ni-cd).   Voltage input = 6v. If your receiver is running a higher voltage output for the servos/esc this will not work.   Simple on off toggle switch (no modes just on or off only).   Male JR connector installed.   Part Number: L-051-4 Made by: BSP
1/10 Alloy Superbright Light Bar - 4 Leds   To suit 1/10 scale models car or truck shells. The body shell these are to go will require drilling for these to be put in place. Screws and fixings included.   Measures: 72mm long.   Two methods to power: a) 3rd channel on receiver or using the receiver battery port if your using an esc. b) Seperate 6v battery pack (no other voltage will work. Must be 6v ni-mh / ni-cd).   Voltage input = 6v. If your receiver is running a higher voltage output for the servos/esc this will not work.   Simple on off toggle switch (no modes just on or off only).   Male JR connector installed.   Part Number: L-051-4 Made by: BSP
1/10 Alloy Superbright Light Bar - 4 Leds   To suit 1/10 scale models car or truck shells. The body shell these are to go will require drilling for these to be put in place. Screws and fixings included.   Measures: 72mm long.   Two methods to power: a) 3rd channel on receiver or using the receiver battery port if your using an esc. b) Seperate 6v battery pack (no other voltage will work. Must be 6v ni-mh / ni-cd).   Voltage input = 6v. If your receiver is running a higher voltage output for the servos/esc this will not work.   Simple on off toggle switch (no modes just on or off only).   Male JR connector installed.   Part Number: L-051-4 Made by: BSP
MPN
L-051-4
Compatible Scale
1:10
Brand
BSP
Type
Light Bar
EAN
5055681368197